The configuration of central air conditioners is different from that of split air conditioners. It requires individualized configuration for different homes. Air conditioner configurations of different brands and different models will exert different functions. At the same time, it is related to different house structures and family conditions. The individual design of the air-conditioning configuration and air-conditioning layout is the most representative of the air-conditioning designer's professional standards.
Several air-conditioned "doorways"First, there is a stress on the air outlet
Regarding the air distribution method, if it is a last resort, try not to bury the air-conditioning air outlet on the ceiling side. Although the aesthetics of the ceiling design of the living room will be satisfactory, it will also lead to a poor heating effect. Therefore, it is necessary to ensure the surrounding of the air vent as much as possible. unobstructed. On the other hand, for the bedroom space, it is also necessary to avoid direct air-supply from the air-conditioner outlet.
Second, the air supply method must be adapted to local conditions
There are many ways to get back and forth to the air. For large spaces, you can use the back-and-forth air return method, which not only ensures beauty but also minimizes noise.
If the ceiling space is not very spacious, it can be sent back and forth to the side, which saves space and is relatively simple and generous to avoid feelings of depression.
If the ceiling space is large enough, it is recommended that the air be sent back and forth, so that the heating effect of heating in winter can be guaranteed to the greatest degree.
If the room does not have any ceiling form and is unwilling to adopt the form of a wall-hanger, it may be considered to create a side-to-side approach or air return from the ceiling in an adjacent space such as a full ceiling space using a kitchen or bathroom.
Third, the location of the outdoor unit should pay attention
The outdoor unit should also pay attention to a reasonable layout position. When designing, it is necessary to consider the location of the installation. It is not possible to place two or more machines at random, which will result in unnecessary waste of energy. put.
On the other hand, the location of the outdoor unit must also take into account the convenience of future maintenance, and some space for maintenance should be reserved.
In addition, the outdoor unit should avoid placing close to the outdoor space of the bedroom and the study, so as to prevent noise from affecting the rest and learning of the family.
Central air conditioning
Water Based Inkjet Receptive Coating For Canvas
Water Based Inkjet Receptive Coating For Canvas,Inkjet Paper ,Polycarbonate Coating,Soft Touch Coating
Guangzhou Quanxu Technology Co Ltd , https://www.skychema.com