Technical standards refer to standards established for technical matters that need to be negotiated and unified in the field of standardization, and are issued by the state (or international organizations). It is understood that there are more than 2,000 standard fasteners in the world, and there are more than 400 fastener standards in China.
Technical standards are divided into basic technical conditions, structural elements, mechanical properties, products, processes, testing, test methods, etc., which have become the link between science and technology to productivity, and an important basis for realizing product socialization and intensification. Arbitration for acceptance of trade and business.
It is no exaggeration to say that when we feel incredible about the rapid rise of the fastener industry in developed countries and regions such as Japan, South Korea and Taiwan in just 20 years, and hope to find out the answer, It's hard to imagine that the answer is that they are used to using standards. Standards not only improve the technological content of their products, help companies sell their products, sell them better, but also enable them to scientifically grasp the objective laws and understand the unique laws of all objective things.
For China's fastener companies, it is more urgent to standardize and continuously promote the development of enterprises. It is customary to measure their own development by standards. In this way, we will feel the unparalleled benefits of standards in the near future. This is the ultimate goal of our learning to use standards.
Taking passenger cars as an example, in the production of nearly 10 million vehicles in 2009, the imported brands accounted for 60%-70% of China's automobile consumption market, and 60%-65% of fasteners on the car were imported. . This of course is related to the foreign ownership of these products, but there are other factors. The low matching rate of Chinese automotive fasteners to European, American and Japanese automotive fasteners is one of the key factors, and the gap here lies in the understanding of standards. These companies do not understand the tightness of European, American and Japanese cars. The certification standard of the firmware is therefore unable to pass the standard certification of these vehicle manufacturers, and it is difficult to enter the procurement system of European, American and Japanese cars and become their suppliers.
With the rapid transformation of the economic development mode of the fastener industry, enterprises have to consider the need to make fine products, improve the technological content, and transform the original extensive production mode. Thus, the standard became the weapon in their hands. While enterprises regard quality as a lifeline, they must use standards as a nourishment to produce healthy vitamins and nutrients.
We are delighted to see that the basic standards led by the China Fastener Standardization Technical Committee have issued more than 10 new standards every year.
In 2009, a number of fastener standards and related standards were announced and implemented in 2010.
Fastener standards such as: GB/T802.3-2009 "hexagonal flange cap nut welding type", GB/T802.4-2009 "hexagonal low spherical cap nut welding type" GB/T802.5-2009 "Non Metal insert hexagonal locking cap nut welding type", GB/T923-2009 "hexagonal cap nut", GB/T3098.22-2009 "fastener mechanical properties fine-grained non-tempered steel bolt screw and stud" .
Fastener related standards such as: GB/T5267.4-2009 "fastener surface treatment corrosion-resistant stainless steel passivation treatment", GB/T5953.1-2009 "cold steel wire part 1 heat-treated cold-rolled steel wire", GB /T5953.2-2009 "Cold-free steel wire second part non-heat-treated cold-rolled steel wire", GB/T230.1-2009 "metal material Rockwell hardness test part 1 test method", GB/T4340.1-2009 "Vickers hardness of metal materials Part 1 test method", GB/T4340.4-2009 "Metal material Vickers hardness part 4 hardness value table", GB/T23904-2009 "Non-destructive testing ultrasonic surface wave detection method" and so on.
The newly developed standards include non-tempered cold-rolled steel hot-rolled wire rods and cold-rolled steel hot-rolled wire rods; revised GB/T3098.1-20XX “Mechanical performance bolts and studs for fasteners†are also submitted for approval. in.
Through the extensive development, revision and publication of fastener standards, we can see that the fastener industry has achieved brilliant results in these years. In the future, these standards will lead the healthy development of China's fastener industry to the international advanced level.
Technical standards are divided into basic technical conditions, structural elements, mechanical properties, products, processes, testing, test methods, etc., which have become the link between science and technology to productivity, and an important basis for realizing product socialization and intensification. Arbitration for acceptance of trade and business.
It is no exaggeration to say that when we feel incredible about the rapid rise of the fastener industry in developed countries and regions such as Japan, South Korea and Taiwan in just 20 years, and hope to find out the answer, It's hard to imagine that the answer is that they are used to using standards. Standards not only improve the technological content of their products, help companies sell their products, sell them better, but also enable them to scientifically grasp the objective laws and understand the unique laws of all objective things.
For China's fastener companies, it is more urgent to standardize and continuously promote the development of enterprises. It is customary to measure their own development by standards. In this way, we will feel the unparalleled benefits of standards in the near future. This is the ultimate goal of our learning to use standards.
Taking passenger cars as an example, in the production of nearly 10 million vehicles in 2009, the imported brands accounted for 60%-70% of China's automobile consumption market, and 60%-65% of fasteners on the car were imported. . This of course is related to the foreign ownership of these products, but there are other factors. The low matching rate of Chinese automotive fasteners to European, American and Japanese automotive fasteners is one of the key factors, and the gap here lies in the understanding of standards. These companies do not understand the tightness of European, American and Japanese cars. The certification standard of the firmware is therefore unable to pass the standard certification of these vehicle manufacturers, and it is difficult to enter the procurement system of European, American and Japanese cars and become their suppliers.
With the rapid transformation of the economic development mode of the fastener industry, enterprises have to consider the need to make fine products, improve the technological content, and transform the original extensive production mode. Thus, the standard became the weapon in their hands. While enterprises regard quality as a lifeline, they must use standards as a nourishment to produce healthy vitamins and nutrients.
We are delighted to see that the basic standards led by the China Fastener Standardization Technical Committee have issued more than 10 new standards every year.
In 2009, a number of fastener standards and related standards were announced and implemented in 2010.
Fastener standards such as: GB/T802.3-2009 "hexagonal flange cap nut welding type", GB/T802.4-2009 "hexagonal low spherical cap nut welding type" GB/T802.5-2009 "Non Metal insert hexagonal locking cap nut welding type", GB/T923-2009 "hexagonal cap nut", GB/T3098.22-2009 "fastener mechanical properties fine-grained non-tempered steel bolt screw and stud" .
Fastener related standards such as: GB/T5267.4-2009 "fastener surface treatment corrosion-resistant stainless steel passivation treatment", GB/T5953.1-2009 "cold steel wire part 1 heat-treated cold-rolled steel wire", GB /T5953.2-2009 "Cold-free steel wire second part non-heat-treated cold-rolled steel wire", GB/T230.1-2009 "metal material Rockwell hardness test part 1 test method", GB/T4340.1-2009 "Vickers hardness of metal materials Part 1 test method", GB/T4340.4-2009 "Metal material Vickers hardness part 4 hardness value table", GB/T23904-2009 "Non-destructive testing ultrasonic surface wave detection method" and so on.
The newly developed standards include non-tempered cold-rolled steel hot-rolled wire rods and cold-rolled steel hot-rolled wire rods; revised GB/T3098.1-20XX “Mechanical performance bolts and studs for fasteners†are also submitted for approval. in.
Through the extensive development, revision and publication of fastener standards, we can see that the fastener industry has achieved brilliant results in these years. In the future, these standards will lead the healthy development of China's fastener industry to the international advanced level.
Manual, automatic and semi-automatic machines,Machine suitable for all workpiece sizes and requirements,Floor stand and table top machines,Fast and accurate cutting requires carefully developed equipment and consumables. We offer a complete range of cutting machines, gripper tools and cutting wheels, all designed to ensure convenient, efficient and deformation-free cutting for a wide range of workpiece sizes.
Automatic Cutting Machine,Auto Cutting Machine,Automated Cutting Machine,Semi Automatic Cutting Machine
TROJAN (Suzhou) Technology Co., Ltd. , https://www.trojanmaterials.com