Cabinets are the indispensable functional components in home improvement. There are many manufacturers of cabinets. It is difficult for consumers to choose the cabinet industry to distinguish the advantages and disadvantages. It can only be determined or accepted according to the material of the surface. The following experts are summarized for you. The four most easily overlooked details for choosing a cabinet:
Brand Shop: Snowboard Cabinets Ochia Cabinets
From a large perspective, we must first look at the assembly effect of the entire cabinet. The small gap in the cabinet should be uniform and the door should be straight. The door is the face of the cabinet and is as important as the person's face. Some plants produce door panels that are susceptible to moisture deformation due to improper handling of substrates and surface processes. These can be seen at a glance.
Some details also need to pay attention: for example, the edge of the plate. The edges of the high quality cabinets are delicate and smooth with the touch, the seal line is straight, and the joints are fine. Because this is a straight edge banding machine to finish sealing, decapitation, trimming, chamfering, polishing and many other processes at a time, which can ensure the most accurate size. The workshop-style small factory uses a brush coating, manual pressure sealing edge, with a knife to trim the edge, with a manual polishing machine polishing, due to uneven coating, uneven sealing, sealing line undulating, and even edge sealing Fall off.
Also emphasize punching. Today's panel furniture is assembled on three-in-one connectors, which requires a lot of positioning holes in the panel. The fit and accuracy of the hole position will affect the structural integrity of the cabinet cabinet. Professional manufacturers use a 32-module multi-row drill to complete a number of holes on a board edge and a board surface at a time. These holes are the same positioning reference, and the dimensional accuracy is guaranteed. Handworkers use drills and even pistols to drill holes. Larger size errors; also pay attention to the drawer slides. Although it is a small detail, it is an important part of the quality of the cabinet. Due to an error in the matching of the hole position and the board a dimension, the condition that the drawer pulling is not smooth or left and right is loose, and the drawer gap is also required to be uniform.
The most important part, and the first step in the cabinet production, is to look at the panel. Panels are also called sheet blanks. The large-scale specialized enterprises use electronic cutting saws to input the processing dimensions through the computer. The computer controls the dimensional accuracy of the material selection. The performance of the equipment is stable. The board size precision is very high. The tolerance unit is in micrometers, and there is no collapse phenomenon at the edge of the board. . The hand-workshop-type small factories use small manual cutting saws, and even use a woodworking open-saw to build a simple operation table. The board size produced by this kind of simple equipment is often larger than 1mm, and often occurs. The collapse phenomenon, that is, the sheet substrate is exposed.
It does not matter if you do not understand the cabinet industry. I believe that if you are willing to spend time and run several stores, you can almost become a half expert.
Links: home renovation cabinets must be renovated to start a good cabinet
Kitchen Cabinets Home Furnishing Home Decor Furniture Furniture Furniture Cabinets Doors Drawers Cabinets Doors Home Decor Home Improvement Home Furnishing