The threshold stone definition and function
The definition of threshold stone:
The threshold stone refers to the tiles used for laying in the kitchen, bathroom floor and living room, or the wooden floor of the room, and the living room. In short, it refers to a stone used to separate different materials or distinguish different functions.
The role of the threshold stone:
The threshold stone can play a role in preventing moisture and prevent the floor from arching. The lintel stone of the bathroom and kitchen also has the function of preventing water from flowing to the outside. If the threshold stone is not used, the bathroom and the kitchen floor will have to go down and form a height difference with the hall. It is visually unappealing and life is not very convenient.
Common materials and construction process for paving stone
The commonly used materials for paving stone
Commonly used to do the threshold stone are black sand, gold and other yellow stone lines, but in recent years there are also some personalized design using tiles or mosaics as a threshold stone.
In terms of Accessories, cement mortar is mainly used as a binder.
Stone paving construction technology
In the installation, cement mortar is usually used to build the door sill. In the course of use, the threshold stone is stepped on after a certain period of time, sometimes there is crack phenomenon of the surrounding cement mortar. Therefore, it is recommended that when laying cement mortar, the ground on the side of the toilet should be left as a gap, which is roughly controlled to be about 5 mm wide. After the interior is filled with cement mortar, the surface is slightly concave, and the construction adhesive or silicone adhesive is used afterwards. (Material used for fixing sanitary fixtures) Make a circle so that even if cracks in the cement mortar are released from the rocker, when water is present, water will not penetrate the gap. At the same time, construction adhesive or silicone adhesive can also be used to put a little bit of the interface between the wooden door cover and the floor of the bathroom floor tile to reduce the chance of moisture spreading along the floor to the door cover and causing discoloration and rot in the lower part of the door cover.
The common problems and solutions of paving stone
The installation of the threshold stone is a difficult task for home decoration. Nowadays, many decoration company workers do not schedule well, the process is reversed, the carpentry is first constructed, the door cover is in the end, then the tiler wets the floor tile, and finally it is equipped with a threshold stone, which leads to the installation of the threshold stone. It is difficult to flatten the grass-roots level and the height and clearance are difficult to control. The correct method is to finish the tile in the bricklayer. With the exact size of the threshold, the door threshold is configured and then the woodwork is applied to the door-sleeve, and then the outer floor tiles or The floor, to calculate the reserved space and height.
Construction specifications for paving stone
Due to the difference in floor materials and practices in different rooms, the ground thickness is different, resulting in a height difference, and some materials are not good enough. For example, the living room or aisle flooring laminate flooring, about the thickness of 12 to 15 (8 thick floor + 5 thick mats), and the bathroom floor tiles, there is the thickness of cement mortar + tile thickness + surface water to find the slope thickness, etc., after completion Far above the floor. At the same time, the bathroom should consider that a small amount of normal water should not flow out to damage the floor. In this way, “the threshold stone†is one of the commonly used solutions.
In general, it is recommended that the threshold stone be slightly higher than the bathroom floor by 5 to 10 mm. Slightly blocking the height of the flow can be, one is beautiful, the second is as little as possible at the foot, the third is the bathroom door is the highest point of the slope, water should be very little.
The low side, the threshold stone is not higher than the ground should not exceed 20 millimeters, with the same reasoning above, one is beautiful, and the second is less as much as possible, the third is the standard stone thickness is usually around 18 to 20.
Too high height difference, you can choose to thicken another custom stone. Pay attention to whether there are elderly or disabled people in the home.
Renovation Material Knowledge Renovation Construction Knowledge Delicate Flooring Decorating Home Decorating Room Decorating Design Home Improvement Decoration Looking For Decoration Company How Are You Decorating Living Room Decorations Partitions Floor Tiles Doors Bathroom Tiles Bathroom Doors Bathroom Doors Bathroom Size Bathroom Design Toilets Bathrooms Bathroom Tiles Floor Tiles Kitchen Tiles Ld tiles
Wood Plastic Composite Cladding,Plastic Composite Wood,Wood Composite
WPC Decking Co., Ltd. , http://www.hswpcdecking.com