Home>Bearing knowledge>Restoring the shaft hole |
Close the correction of the shaft hole
Source: Bearing network time: 2017-11-22
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
(2) Use the Keisin 1755 scavenger to remove the outer surface of the bearing hole.
(3) Apply a thin layer of Kesaixin 1731 release agent on the outer ring of the bearing; in order to facilitate the disassembly of the bearing in the future.
(4) Manufacturing 2311 antifriction repair agent.
(5) Apply the repairing agent directly to the outer ring of the bearing; but only apply to the rear half of the outer ring of the bearing. The amount of coating should ensure that there is no glue between the outer ring of the bearing and the shaft hole; The gap is completely filled.
(6) Push the bearing coated with the repair agent into the shaft hole.
(7) Wipe off the extruded repair agent. Again, when pushing the bearing, make sure that the repairing position is not lacking in glue.
(8) Position the bearing.
a. The simplest method is to install the shaft together with the bearing; after the accuracy is determined, the repair agent is cured in this direction.
b. Conditions can be used; can be positioned or installed by three-point gasket positioning method or manufacturing fixture.
(9) It can be put into use after it is completely cured.
Recommend to friends comments close window
Bearing related knowledge |
Analysis of the characteristics of imported tapered bearings using new skills Nsk imported bearings after heat treatment several major parts shortcomings analysis of the bearing box device and precautions interpretation: the effect of imported bearings and the layout characteristics KOYO bearing industry development and the need for CNC equipment |
This article links to http://
Please indicate China Bearing Network http://
Previous:The characteristics of the spiral spring bearing Next edit: Correction of the shaft hole correction
Four Axis Machining Service,Five Axis Machining,Four Axis Machining,Five Axis Machining Service
Lizhi Precision Manufacturing Technology Co.,Ltd , https://www.lizhihardware.com